PAN9026 module: test 802.3mc (Wifi RTT) capabilities
We already seen this thread: "Which Linux driver and firmware for PAN9026 module"
and we already have the following informations/equipments:
- 2 pieces of Panasonic dev boards ENWF9201AXEF
- some additionals Panasonic ENWF9201AZEF boards
- Access to the Marvell Xtranet and all the sources of the drivers and software
We need to make a real working example that is able to demonstrate how to use one Panasonic module as an "Initiatior" (the device that is able to measure the distance) and another Panasonic module as a "Responder" (the reference on which the distance is measured).
We made already lot of tests without success and in our opinion the problem is related to the fact that Marvell did not created a driver for the 88W8977 (the one on the PAN9026 module) that supports the above configuration. I mean that, despite what I've found in the Marvell documentation, it seems that the driver does not allow to configure the PAN9026 as an Initiator or as a Responder.
Any Panasonic representative can provide us some additional informations about how to execute the above test?