Yes it is possible to use PAN9045/PAN9055 Wi-Fi and BT/BLE at the same time.
The PAN9045/9055 has two independent radios for WiFi and for BT/BLE.
If both radios (WiFi and BT) are active, the firmware configures WiFi automatically to Mimo1x1.
Also the bridging between WiFi and BT/BLE is possible with subject to certain conditions:
- BT coexistent mechanism must be active
- The 2 antennas should have good isolation to each other. Otherwise additional time-based coexistent mechanism should be active
- With respect to the type of the active coexistent mechanism the available bandwidth for WiFi and BT will be more or less reduced.
- If the communication to WiFi and BT is done over the same Host Interface (e.g. USB), the bandwidth must be sufficient.