Simultaneous use Wi-Fi / BLE

Is possible to use PAN9045/PAN9055 Wi-Fi and BLE at the same time. i.e. receive data in Wi-Fi transmit in BLE concurrently (bridging)

1reply Oldest first
  • Oldest first
  • Newest first
  • Active threads
  • Popular
  • Yes it is possible to use PAN9045/PAN9055 Wi-Fi and BT/BLE at the same time.
    The PAN9045/9055 has two independent radios for WiFi and for BT/BLE.
    If both radios (WiFi and BT) are active, the firmware configures WiFi automatically to Mimo1x1.

    Also the bridging between WiFi and BT/BLE is possible with subject to certain conditions:

    -    BT coexistent mechanism must be active
    -    The 2 antennas should have good isolation to each other. Otherwise additional time-based coexistent mechanism should be active
    -    With respect to the type of the active coexistent mechanism the available bandwidth for WiFi and BT will be more or less reduced.
    -    If the communication to WiFi and BT is done over the same Host Interface (e.g. USB), the bandwidth must be sufficient. 

    Like 1
Like Follow
  • Status Answered
  • 4 yrs agoLast active
  • 1Replies
  • 1099Views
  • 3 Following