ENW-C9A22A4EF connection problem
We have a problem about the ENW-C9A22A4EF connection.
Our customer designed a firmware for this module (script) which downloaded to the module by the radio waves.
He used a one (from vendor A) to connect to the PC by USB with special firmware.
The program PORTAL (Mfg is SYNAPSE) recognized this module as BRIDGE and connect through it with another modules.
However, all samples (from vendor B) can’t connect to this BRIDGE and the program unable to recognize them.
The modules from vendor A are able to connect to this BRIDGE without any problem.
Do you have any idea about this issue? thanks!
The two modules are the same and should work ok
The reason why one of them is not connecting to the Bridge is probably the channel that is selected via the tool!
While using the Synapse tool please us the feature “Find Nodes” which, and make sure that the channel setting for is the same for the two modules.
It is expected that you will be able to connect after doing so.